HEAVY ID TORQUE Bangle / Bracelet Identity & SOLID 925 Sterling Silver

  
HEAVY ID TORQUE Bangle / Bracelet - Identity & SOLID 925 Sterling Silver. Mens Chunky ID Torc Bangle / Bracelet - HEAVY! Horizontal Diameter is 7 cm's (2.75 inch) (straight line from the two inside widest points). The circumference of the bangle by inner measurement is around 18 cm.

Weight: around 85 grams (can vary from item to item). The ID plate width is around 11mm at widest point. Thickness midway around bangle around 7mm. Gap between balls around 2.5 cm. Ball thickness is around 14mm.

SOLID Silver with the 925 hallmark stamp. Suitable for average SMALL wrist of around 7 inches (bigger sizes upon request).

Sizes are ALWAYS quoted as closed " as worn/ fastened" not "end to end" so it is a true length. This is the best way or it can get confusing as clasps can vary. Best to take around 1 inch longer than your actual wrist on most bracelet designs for an average fit. Bracelets with a Hook Clasp or T-bar clasps will generally need to be longer normal.

As do any real thick bracelets 10mm + wide. Most Designs can usually be made to order in any length & also many styles can be made into necklaces. Please kindly carefully check on your size before ordering - it is always better for everyone to get it right the first time around.

IMPORTANT NOTE for International buyers. Some destinations taking are 5. Please do NOT order if this is too long to wait.

Be sure to add me to your favourites list. Then you will be one of the first to know about any promotions & new designs. FAQ - Most Common Questions are Listed Below. For FULL FAQ please use link below. This is a FLAT rate to everywhere - includes the UK, USA (every state), Canada, Australia, Europe & ANYWHERE IN THE WORLD.

We aim to get items off before then but cant always guarantee this. Please carefully CHECK you have ordered the CORRECT size at the time of order - much better for everyone if we get it right first time. Of course we will take care of the above charges. We do have 30-day satisfaction guarantee - we never want anyone to see something they dont love!

The exception to the above policy is if we have pre arranged something personally with you in writing - perhaps the reason it for a gift etc. I have always been extremely fair and always try to help my customers the very best I can. Bottom line, we want you 100 % happy! I have always been extremely fair and always try to work my customers the very best I can. It is very important to get you the perfect size first time around so please carefully read over the below.

If you have already ordered & think you may have ordered the wrong size please let us know immediately. After reading the below and you are still unsure of what size you need please c.

Bracelet Length (Not Actual Wrist Size). Important note - The above sizes are for bracelet lengths with the clasp.

NOT the end to end measurement. Remember not all bracelet are the same to best to go by these notes - not on a bracelet of a different design. MEASURING YOUR WRIST FOR AN ACCURATE BRACELET SIZE. To find your perfect bracelet size, follow these steps.

STEP 1: Measure your wrist with a flexible tape measure or a strip of paper just below the wrist bone, where you would normally wear the bracelet. STEP 2: If you are using a plain strip of paper, mark your size with a pen or pencil then use a ruler to measure the length.

That would be your wrist size. STEP 3: To find your bracelet size, just add your wrist size with the appropriate measurements below. This will allow for movement and flexibility. FITTING STYLE ADD INCH(ES) TO WRIST SIZE. Comfortable Fit - Add 3/4 to 1 inch (2.5 cm).

Loose Fit - Add 1 to 1.25 inches (3 cm). Example - if your wrist was 8 inch you could take a bracelet around 9. Extra Thick Bracelets you would usually need longer than the above. This is to make up for the length lost when closing - it is the inner circumference that counts.

Generally speaking anything wider than 10mm you would need to go longer - often 1.5+ longer than the wrist. Recommendations are normally stated on the item order page. Horizontal Diameter is 7 cm's (2.75 inch) (straight line from the two inside widest points) ---The circumference of the bangle by inner measurement is around 18 cm ---Weight: around 85 grams (can vary from item to item) ---The ID plate width is around 11mm at widest point ---Thickness midway around bangle around 7mm ---Gap between balls around 2.5 cm ---Ball thickness is around 14mm SOLID Silver with the 925 hallmark stamp Suitable for average SMALL wrist of around 7 inches (bigger sizes upon request). The item "HEAVY ID TORQUE Bangle / Bracelet Identity & SOLID 925 Sterling Silver" is in sale since Sunday, November 18, 2018.

This item is in the category "Jewellery & Watches\Men's Jewellery\Bracelets"." and is located in Kettering. This item can be shipped worldwide.

Style: TORQUE Bangle

Main Colour: Silver

Metal Purity: 925

Material: Silver

Metal: Solid Sterling Silver

Brand: SilverWow